Overview of modifications to my 2014 Jeep Grand Cherokee Overland.
RRO Winch Bar
https://www.rocky-road.com/wk2-grand-cherokee-bumper.html
Runva Winch
http://www.runvawinch.com.au/ewx9500-q-12v-evo-with-dyneema-rope
Rough Country Spacers – Front
https://www.roughcountry.com/jeep-suspension-lift-kit-67800.html?find=2014-jeep-grand-cherokee-4wd-380256
Offroad Animal Spacers – Rear
https://offroadanimal.com.au/shock-relocation-bracket-rear-grand-cherokee-wk2-2011-2020/
AlfaOBD Software
https://www.alfaobd.com/
Tyres
Yokohama Geolandar AT G012 in 275/55R20 (32 inch)
Yokohama Geolandar MT G003 in 275/70R18 (33 inch)
27 Comments
Awesome Jeep mate, where are you located?
You can level your Jeep for $60 lol. Just change the air suspension links
thanks for sharing. Did not know you could outfit it with a winch like that.
Very nice. Can you explain where you routed the UHF lead through the firewall, I'm having trouble getting mine through on my 2012 Overland. Cheers
Nice setup.
About 14 inches of clearance ?
I’ve been thinking of doing bal bone but I’ve only got a 2” spring lift. Think I might need a tad more.
Rough country say does not fit air ride suspension. Did it bolt right up? Did you gain lift at all settings? Any issues? Also you used software instead of extended links?
Really nice.
Was it hard to mount the spacers,, especially in the front?
Dan can you please call me at Offroad Animal. I need to talk to you about the suspension 1300902600
Very hardy SUV and reliable !!
I have a request if you are in contact with representatives of a Jeep, then tell them for Russia they made the most reliable jeep!
There is one Jeep Grand Cherokee in 2013 with a 3.6 engine, it has a mileage of almost 800,000 thousand kilometers or 497,096,954 thousand miles !! Not a problem except a broken gearbox !!
First off, love the Jeep. I know this video was posted a while back, but is there any way you can show how to install the spacers and how to use the AlfaOBD? I'm not mechanically inclined, nor am I tech savvy enough to just figure either of those tasks out. Thank you so much
The only thing left to modify are tires
Hey mate any chance I could contact you regarding what you have done. Keen to do the same thing and just wouldn't mind talking to someone who has done it before I go ahead.
Love you Aussies man, yall always put your vehicles in use! These SUVs shouldnt be limited to city driving soccer mom mobiles only…
You should check out Chief Products. Very good protection. I run their Lower front guard, sump protection plate, transmission protection plate, the full Mopar protection plates and a diesel aluminum protection panel underneath, plus Mopar Rock Rails, with air suspension and offroad adventure II package, with air suspension. Mine has a 3.0 diesel, too. 2015, w/ about 53,000 miles. Take it off road a lot in northern Michigan (US), where I have a cabin on the Manistee River.
I saw the rc spacers but they said, no compatible with air suspension, any issue…I would like to get it, specially with an air bag problem, when the truck drops all the way down
What wheels and the wheel offset you use with the 33in tires? I'm looking to do this in a couple weeks on my 2018 Trailhawk.
Rig looks great, can you please explain a bit more about your suspension mods, i cant find any information on using a spacer on ql suspension, what parts were used how is the handling on road? Any warning lights?
Thanks.
Hey Daniel, awesome video. I'm looking to do the same 2in strut lift on my quadralift WK2, did you need to get longer links or did you have to change the air links (the link that connects to the ride height adjustment mechanism?)
Hey hey man, love it. Thanks for posting this. I've read your replies and posts on the forums… Not sure why so many people say this isn't possible. Lol, makes perfect sense to me and I'll be doing this to a 2019 wk2 trailhawk 👊
Impressed with the home built stuff.
Do you have any videos on the software mods?
Do you have to send all the gas to the reservoir before you unhook the air lines to install the spacers? I'm getting very close to doing this mod on my 2015 but I want to make sure I have all the info before I start, thanks!
Great videos btw
What happens when you put this into OR2 ride hight, having the strut spacers in, does it not screw with the vehicle when it tries to lift a further 2.5"?
That’s interesting info, rough country state those spacers won’t fit with air suspension…so I guess they will 👍
Hey mate, been 2 years since you posted the video. Have your CVs survived? I got a 14 diesel too and I'm thinking of doing the same thing just concerned about messing a cv when I'm in woop woop
Hi . Excelent video . You've got rear Airbag spacers and strust spacers?. How do you get the rear airbag spacer? Did you made them?. Thanks.
Hello!